High Quality Portable Digital Multifunctional TIG MMA Wsm
U niversal device for beginners or professionals With a proud 250A, will allow you to master all welding jobs with perfeSend your inquiry
Power Capacity (KVA)
Max Input Current (A)
TIG/MMA Current range(A)
5~200 / 20~180
5~230 / 20~200
ARC Force range(A)
Hot Start Range(A)
Rated Duty Cycle (%)
Pulse Frequency (Hz)
Pulse Duty (%)
Up/Down Slope Time(S)
Pre/Post Flow Time(S)
Basic current range (A)
IP23 / F
IP23 / F
Machine Weight (Kg)
WP-17 TORCH WITH 4M CABLE,
ELECTODE HOLDER WITH 2M CABLE, EARTH CLAMP WITH 2M CABLE
Universal device for beginners or professionals
With a proud 250A, will allow you to master all welding jobs with perfect results, while not limiting your mobility, as the 3m hose package provides enough maneuvering space to guarantee the best possible working comfort.
The compact unit is very light at 8,4 kg and is designed to be very practical for transport with the shoulder strap, and belongs to the new generation of welders controlled by a 32-bit microprocessor, making it even more efficient and economical, while the job memory allows you to access your custom settings at any time.
Clearly arranged control panel
With the digital display on the you determine the stepless pulse function and variable frequency, which allows you to weld metals such as steel, stainless steel, titanium, copper and copper alloys very comfortably and in a controlled manner using the DC direct current method.
INTUITIVE, SIMPLE CONTROL PANEL
- Large numeric LED display with easy-to-use control panel
- Intuitive adjustments for all your material parameters and the specific job you want to do.
- Set it, forget it, weld it.
TIG WELDING FUNCTIONS
2T / 4T mode - Depending on your habit, you can choose between the two settings. When welding, if the switch is set to "2T mode", the torch button must remain pressed throughout the welding process, whereas in "4T mode" you only need to briefly press the switch at the beginning and end of the welding process.
HF ignition - In most cases, HF high frequency ignition is used in TIG welding. It is a non-contact ignition that creates an arc without having to touch the workpiece with the electrode.
TIG / Pulse Switch - Allows switching between TIG Pulse Welding and normal TIG welding.
Welding current - The amperage during welding.
Pulse Welding - In pulse welding, the welding current alternates between base current and pulse current at the desired frequency. The longer the intervals, the less energy and heat is added to the workpiece. By setting the pulse frequency, you determine the time cycle in which the current alternates between pulse and base current. You can also set the percentage of the duration of the pulse current in relation to the base current.
Memory slots - The device has 9 memory slots for storing the set welding parameters, which you can pull up at any time.
Current Rise (Upslope) - You can set this to 0, which means that the unit ignites the arc directly to the set welding current. However, if the set start current is lower than the welding current, the upslope can be set in seconds. In this case, when the torch is operated, the arc ignites at the start current and then increases linearly during the set time until it reaches the set welding current.
Downslope - Exactly the opposite of the upslope, the time during which the current is automatically decreased.
Start Current - The start current allows you to star the unit softer, ignite with the start current, and then increase the current to the weld current. This is especially beneficial when welding thin sheets.
End Current - As long as the downslope current has been set, the end current is the one at which the arc goes out. Also compatible with 4T mode.
Gas preflow Time - This feature allows you to set the time in seconds for gas preflow, which pushes ambient air away from the weld and creates a protective gas atmosphere before welding begins.
Gas postflow time - The time during which, after the welding process, the torch and the workpiece are cooled by the gas flow.
Generally if you choose the different products,our minimum order qty.also will be different.
Acturally, payment would be preferred: Normally we choose in T/T, usually is 30% deposit and pay the balance before shipment.L/C, Western Union is fine
3. Delivery time:
The goods need 30-40 days to be made after receive deposit.
4. Why choose us?
a. We are China Leading manufacturer. We are confident that with our experience in Circuit breaker,Transformer,Relay,Substation,Stablizer etc. Quick delivery time, excellent quality and comprehensive superior service we can give our customers complete satisfaction.
b.100% QC inspection before shipping.
c. For large order, engineer can be sent to your country for on-site mainternace instructions.
d. OEM is available.
5.Our 100% Promise:
1. 24 hours online service.
2. We always say FINE to my customer.
3. The above product photos are coming from main production.
4. Thanks and the first cooperation to be expected.